WARPSPEED PERFORMANCE
WarpSpeed Performance
261 NORTH HWY 62
ROGERS, AR 72756
ph: 479-246-9400
DALLAS
4" 5" DIESEL MUFFLER DELETE REPLACEMENT PIPES
THESE PARTS CAN BE USED TO REPLACE THE STOCK MUFFLER ON MOST DIESEL TRUCKS, *KEEP IN MIND OTHER THAN THE LATE MODEL 6.7 DODGE MOST TRUCKS HAVE AN OFFSET MUFFLER MEANING THAT THE INLET AND OUTLET ARE NOT PARALLEL, ADDING A STRAIGHT SECTION OF TUBING MEANS IT LOOKS BAD AND IT IS DIFFICULT TO WELD OR CLAMP AT AN EXTREME ANGLE. THE STRAIGHT SECTIONS ARE BEST USED TO REPLACE THE MUFFLER ON AN AFTERMARKET KIT WHERE THE EXHAUST IS DESIGNED FOR A STRAIGHT THROUGH APPLICATION.
STRAIGHT 4" X 30" REPLACEMENT PIPE ALUMINIZED
THIS IS 4" ID ON BOTH ENDS SO IT SLIPS OVER THE ENDS OF TUBING SECTION YOU CUT OUT. ALUMINIZED STEEL. (CHECK OUT OUR FAKE MUFFLER IN THE DIESEL MUFFLER SECTION IF YOU ARE REQUIRED TO HAVE A MUFFLER BUT WANT THE STRAIGHT PIPE SOUND.)
- $
- Coming soon
- $
STRAIGHT 5" X 30" REPLACEMENT PIPE ALUMINIZED
THIS IS 5" ID ON BOTH ENDS SO IT SLIPS OVER THE ENDS OF TUBING SECTION YOU CUT OUT. ALUMINIZED STEEL.- $
- Coming soon
- $
OFFSET 3-1/2" X 30" REPLACEMENT PIPE ALUMINIZED
THIS IS AN OFFSET 3-1/2" SECTION THAT WORKS BEST ON STOCK MUFFLER REMOVAL 99-06 FORD 7.7L AND 6.0L, ALSO 01-06 DURAMAX. ALUMINIZED STEEL.- $
- Coming soon
- $
OFFSET 3-1/2" X 30" REPLACEMENT PIPE ALUMINIZED 07.5 DURAMAX
THIS IS 3-1/2" ID ON BOTH ENDS SO IT SLIPS OVER THE ENDS OF TUBING SECTION YOU CUT OUT AND IT IS OFFSET. ALUMINIZED STEEL.- $
- Coming soon
- $
OFFSET 4" X 30" REPLACEMENT PIPE ALUMINIZED 04.5-06 DODGE HO600
THIS IS 4" ID ON ONE END SO IT SLIPS OVER THE END AND INTO THE TUBING SECTION YOU CUT OUT AND IT IS OFFSET. ALUMINIZED STEEL.- $
- Coming soon
- $
4" REPLACEMENT PIPE ALUMINIZED 2007.5 UP DODGE 6.7L
THIS SECTION OF 4" TUBING REPLACES THE MUFFLER ON THE 2007.5 UP DODGE 6.7L, IT HAS HANGERS ATTACHED. (EASY INSTALL WITH THE STOCK BAND CLAMPS) ALUMINIZED STEEL.- $
- Coming soon
- $
STRAIGHT 4" X 30" REPLACEMENT PIPE STAINLESS
THIS IS 4" ID ON BOTH ENDS SO IT SLIPS OVER THE ENDS OF TUBING SECTION YOU CUT OUT. STAINLESS STEEL.- $
- Coming soon
- $
STRAIGHT 5" X 30" REPLACEMENT PIPE STAINLESS
THIS IS 5" ID ON BOTH ENDS SO IT SLIPS OVER THE ENDS OF TUBING SECTION YOU CUT OUT. STAINLESS STEEL.- $
- Coming soon
- $
OFFSET 3-1/2" X 30" REPLACEMENT PIPE STAINLESS
THIS IS AN OFFSET 3-1/2" SECTION THAT WORKS BEST ON STOCK MUFFLER REMOVAL 99-06 FORD 7.7L AND 6.0L, ALSO 01-06 DURAMAX. STAINLESS STEEL.- $
- Coming soon
- $
OFFSET 4" X 30" REPLACEMENT PIPE STAINLESS 04.5-06 DODGE HO600
THIS IS 4" ID ON ONE END SO IT SLIPS OVER THE END AND INTO THE TUBING SECTION YOU CUT OUT AND IT IS OFFSET. STAINLESS STEEL.- $
- Coming soon
- $
WarpSpeed Performance
261 NORTH HWY 62
ROGERS, AR 72756
ph: 479-246-9400
DALLAS
